Home All Groups Group Topic Archive Search About

DI-524 drops wireless connection randomly

Author
12 Feb 2005 5:43 PM
aldebaraan
I'm having a problem with my D-Link DI-524 (firmware v3.1).  I have it
connected via my DSL modem (ZyXel 645), and am having absolutely no
problems with my desktop computer that uses a wired connection.  I am
virtually positive the problem is not with my laptop, as other laptops
(of friends) have had the same problem, and I have never experienced
this problem before with this laptop.

My wireless connection will drop every so often.  Sometimes it's every
minute, for about a minute, sometimes every 5 minutes for a few
minutes, and sometimes it doesn't even drop.  I can't figure it out,
but because I have no problems with the desktop, I'm guessing there is
some wireless mess.

I am currently using WEP w/o MAC filtering (though I have tried all
combinations of both, to no avail).  Anyone know of any special things
that need to be done to a DI-524 to prevent this?

Author
12 Feb 2005 6:04 PM
BigJIm
well check with your laptop for other wifi connection points around you.
you could be getting interference from them, change your channel.
Show quoteHide quote
"aldebaraan" <aldebar***@hotmail.com> wrote in message
news:1108230226.741617.149010@z14g2000cwz.googlegroups.com...
> I'm having a problem with my D-Link DI-524 (firmware v3.1).  I have it
> connected via my DSL modem (ZyXel 645), and am having absolutely no
> problems with my desktop computer that uses a wired connection.  I am
> virtually positive the problem is not with my laptop, as other laptops
> (of friends) have had the same problem, and I have never experienced
> this problem before with this laptop.
>
> My wireless connection will drop every so often.  Sometimes it's every
> minute, for about a minute, sometimes every 5 minutes for a few
> minutes, and sometimes it doesn't even drop.  I can't figure it out,
> but because I have no problems with the desktop, I'm guessing there is
> some wireless mess.
>
> I am currently using WEP w/o MAC filtering (though I have tried all
> combinations of both, to no avail).  Anyone know of any special things
> that need to be done to a DI-524 to prevent this?
>
Author
12 Feb 2005 6:05 PM
Airhead
Show quote Hide quote
"aldebaraan" <aldebar***@hotmail.com> wrote in message
news:1108230226.741617.149010@z14g2000cwz.googlegroups.com...
> I'm having a problem with my D-Link DI-524 (firmware v3.1).  I have
it
> connected via my DSL modem (ZyXel 645), and am having absolutely no
> problems with my desktop computer that uses a wired connection.  I
am
> virtually positive the problem is not with my laptop, as other
laptops
> (of friends) have had the same problem, and I have never experienced
> this problem before with this laptop.
>
> My wireless connection will drop every so often.  Sometimes it's
every
> minute, for about a minute, sometimes every 5 minutes for a few
> minutes, and sometimes it doesn't even drop.  I can't figure it out,
> but because I have no problems with the desktop, I'm guessing there
is
> some wireless mess.
>
> I am currently using WEP w/o MAC filtering (though I have tried all
> combinations of both, to no avail).  Anyone know of any special
things
> that need to be done to a DI-524 to prevent this?

First I would download netstumbler at www.netstumbler.com.
Monitor your area for a few days, especially when you are having
problems.
Netstumbler will show up any other networks in your area that could
cause interference.
You could be on the same channel as someone nearby.
Have you tried changing to a different channel.......
Author
12 Feb 2005 6:11 PM
Robert Jacobs
All good things to do, I would also suggest doing the following to prevent
your adapter from trying to connect to a stronger wifi connection.
How do I keep my clients connected to My Network, even when a Nearby Network
has a stronger Signal.

1. Double click on the wireless network connection in the system tray.
2. Click on properties
3. Click on Wireless Networks Tab
4. Create a profile for your network in the prefered networks box
5. Click on advanced
6. Uncheck the box that says Automatically connect to non-prefered
networks....

Show quoteHide quote
"Airhead" <campb***@alliancecable.net> wrote in message
news:420e457c$0$22517$2c56edd9@news.cablerocket.com...
>
> "aldebaraan" <aldebar***@hotmail.com> wrote in message
> news:1108230226.741617.149010@z14g2000cwz.googlegroups.com...
>> I'm having a problem with my D-Link DI-524 (firmware v3.1).  I have
> it
>> connected via my DSL modem (ZyXel 645), and am having absolutely no
>> problems with my desktop computer that uses a wired connection.  I
> am
>> virtually positive the problem is not with my laptop, as other
> laptops
>> (of friends) have had the same problem, and I have never experienced
>> this problem before with this laptop.
>>
>> My wireless connection will drop every so often.  Sometimes it's
> every
>> minute, for about a minute, sometimes every 5 minutes for a few
>> minutes, and sometimes it doesn't even drop.  I can't figure it out,
>> but because I have no problems with the desktop, I'm guessing there
> is
>> some wireless mess.
>>
>> I am currently using WEP w/o MAC filtering (though I have tried all
>> combinations of both, to no avail).  Anyone know of any special
> things
>> that need to be done to a DI-524 to prevent this?
>
> First I would download netstumbler at www.netstumbler.com.
> Monitor your area for a few days, especially when you are having
> problems.
> Netstumbler will show up any other networks in your area that could
> cause interference.
> You could be on the same channel as someone nearby.
> Have you tried changing to a different channel.......
>
Author
13 Feb 2005 10:18 PM
aldebaraan
Okay, I've been working with NetStumbler, and I'm getting drops like
crazy.  I've continued to try every different configuration (WEP vs.
none, MAC filtering vs. none, etc.), and they all seem to show spotty
coverage.

I am picking up two other networks (one strong and one spotty), and
I've been on channel 6 while they were on 11 and 1 respectively.  I
switched to 10, though I figured 6 was fine, and the results were the
same.  Oh, and I already have a profile for my network set up, and I
had the box to Automatically connect to non-preferred networks
unchecked.  After success with other products in the past, I'm really
baffled as to what could be going wrong this time.

I'm still thinking there's something weird with the DI-524...any ideas?
Author
13 Feb 2005 11:36 PM
dave AKA vwdoc1
Hmmm newbie questions from me.
Are you using a matching D-Link adapter?
What OS are you using?
Have you tried another computer to see if it was not just one of htem.
How are the connection/signal levels to the router from your computer?
Is the antenna attached firmly?
Any brick walls, floors or electronic devices (microwaves or cordless
phones) close to either the router or the computer?

From the
http://www.netstumbler.com/downloads/netstumbler_v0.4.0_release_notes.pdf
.. When NetStumbler is in "auto reconfigure" mode (the default),
it will occasionally disconnect you from your network. This
enables it to perform its scans accurately, and is not a bug.\

So if I understand it correctly you might have Netstumbler working along
with your adapter software???
The adapter software is configured for YOUR router, but Netstumbler might
still be trying to scan for other access points.

later from the newbie,
dave also with a DI-524 and trying to learn  <g>


Show quoteHide quote
"aldebaraan" <aldebar***@hotmail.com> wrote in message
news:1108333092.091405.80840@c13g2000cwb.googlegroups.com...
> Okay, I've been working with NetStumbler, and I'm getting drops like
> crazy.  I've continued to try every different configuration (WEP vs.
> none, MAC filtering vs. none, etc.), and they all seem to show spotty
> coverage.
>
> I am picking up two other networks (one strong and one spotty), and
> I've been on channel 6 while they were on 11 and 1 respectively.  I
> switched to 10, though I figured 6 was fine, and the results were the
> same.  Oh, and I already have a profile for my network set up, and I
> had the box to Automatically connect to non-preferred networks
> unchecked.  After success with other products in the past, I'm really
> baffled as to what could be going wrong this time.
>
> I'm still thinking there's something weird with the DI-524...any ideas?
>
Author
13 Feb 2005 11:45 PM
merv.hrabi
does someone nearby have a cordless phone - unfortunately a lot of them
operate in the same freq rnages (ISM) as 802.11 devices ...
Author
14 Feb 2005 4:34 PM
matthudon
Could you display your log file from your router ? enable all check
boxes for events to record (while on ur laptop) and see what is going
on.
Author
2 Mar 2005 4:02 AM
Mark Reeves
Try using the 3.02 firmware available on the D-Link support site:
http://support.dlink.com/products/view.asp?productid=DI%2D524%5FrevC

3.02 is supposed to fix the stability for channel 6 issues.


Show quoteHide quote
"aldebaraan" <aldebar***@hotmail.com> wrote in message
news:1108230226.741617.149010@z14g2000cwz.googlegroups.com...
> I'm having a problem with my D-Link DI-524 (firmware v3.1).  I have it
> connected via my DSL modem (ZyXel 645), and am having absolutely no
> problems with my desktop computer that uses a wired connection.  I am
> virtually positive the problem is not with my laptop, as other laptops
> (of friends) have had the same problem, and I have never experienced
> this problem before with this laptop.
>
> My wireless connection will drop every so often.  Sometimes it's every
> minute, for about a minute, sometimes every 5 minutes for a few
> minutes, and sometimes it doesn't even drop.  I can't figure it out,
> but because I have no problems with the desktop, I'm guessing there is
> some wireless mess.
>
> I am currently using WEP w/o MAC filtering (though I have tried all
> combinations of both, to no avail).  Anyone know of any special things
> that need to be done to a DI-524 to prevent this?
>