"Jon Kelly" <nob***@home.com> wrote in message
news:Xns95E9D8B17EAEDmagadogfbgorg@216.196.97.142...
> Hi,
>
> I have a DWL-900 (not +) which I haven't used for over a year.  I now
> would
> like to put it to use, but can't recall the admin PW I set it up with (or
> at least, IT isn't recognizing the PW I'm *SURE* I used. ;)
>
> The DLink site says that I have to send it back to them... which almost
> doesn't seem worth the trouble to me.
>
> Does anyon know if there is there a way of resetting it to factory
> defaults
> if I crack it open?

"drriff" <drr***@mindspring.com> wrote in message
news:BYiKd.7522$YD5.5170@newsread3.news.pas.earthlink.net...
: Here are the reset instructions from the US website for the DWL-900AP
(hope
: that is what you are talking about)
:
: The only way to reset the DWL-900 to default settings is to run the SNMP
: Utility.
:
: Step 1 Go to Start > Programs > D-Link Wireless Access Point > SNMP
Utility.
:
: Step 2 Click Search and your DWL-900 will show up in list. Click on
DWL-900
: and click Setup.
:
: Step 3 If prompted for password, enter it.
:
: Step 4 Click on System tab.
:
: Step 5 Click Load Default button and this will reset the DWL-900 to
factory
: settings.
:
: --------------------------------------------------------------------------
------
:
:
:
: http://support.dlink.com/SupportFAQ/default.asp?model=DWL%2D900AP
:
:
:
: "Jon Kelly" <nob***@home.com> wrote in message
: news:Xns95E9D8B17EAEDmagadogfbgorg@216.196.97.142...
: > Hi,
: >
: > I have a DWL-900 (not +) which I haven't used for over a year.  I now
: > would
: > like to put it to use, but can't recall the admin PW I set it up with
(or
: > at least, IT isn't recognizing the PW I'm *SURE* I used. ;)
: >
: > The DLink site says that I have to send it back to them... which almost
: > doesn't seem worth the trouble to me.
: >
: > Does anyon know if there is there a way of resetting it to factory
: > defaults
: > if I crack it open?
:
:

"AR15" <AJChw***@thecompletemachine.com> wrote in
news:kIWdnWrTwMlXImfcRVn-2Q@speakeasy.net:

> Ouch...The DWL-900AP has no physical RESET button!
>
> Go to D-Links site...Go to Support and email them with the question.
> There must be a way to reset the device to Factory defaults.
>
> AJC
>
> "drriff" <drr***@mindspring.com> wrote in message
> news:BYiKd.7522$YD5.5170@newsread3.news.pas.earthlink.net...
>: Here are the reset instructions from the US website for the DWL-900AP
> (hope
>: that is what you are talking about)
>:
>: The only way to reset the DWL-900 to default settings is to run the
>: SNMP Utility.
>:
>: Step 1 Go to Start > Programs > D-Link Wireless Access Point > SNMP
> Utility.
>:
>: Step 2 Click Search and your DWL-900 will show up in list. Click on
> DWL-900
>: and click Setup.
>:
>: Step 3 If prompted for password, enter it.
>:
>: Step 4 Click on System tab.
>:
>: Step 5 Click Load Default button and this will reset the DWL-900 to
> factory
>: settings.
>:
>: ----------------------------------------------------------------------
>: ----
> ------
>:
>:
>:
>: http://support.dlink.com/SupportFAQ/default.asp?model=DWL%2D900AP
>:
>:
>:
>: "Jon Kelly" <nob***@home.com> wrote in message
>: news:Xns95E9D8B17EAEDmagadogfbgorg@216.196.97.142...
>: > Hi,
>: >
>: > I have a DWL-900 (not +) which I haven't used for over a year.  I
>: > now would
>: > like to put it to use, but can't recall the admin PW I set it up
>: > with
> (or
>: > at least, IT isn't recognizing the PW I'm *SURE* I used. ;)
>: >
>: > The DLink site says that I have to send it back to them... which
>: > almost doesn't seem worth the trouble to me.
>: >
>: > Does anyon know if there is there a way of resetting it to factory
>: > defaults
>: > if I crack it open?
>:
>:
>
>