linksys setup help

9 Feb 2005 10:16 PM

J.

I've installed one of the Linksys Wireless G routers (4 hardwire
ports, plus B and G mode wireless). I'm trying to access it with a
handlheld in mode B, that is known to work wirelessly.

The handlheld has been able to scan the network, and thus "sees" it
but seems unable to connect.

I've turned off WEP for the time being, to simplify things.

Not having configured a wireless router before, Im stumped where
to go next. The handlheld is a NEC Mobilepro, running windows CE
2000, and is known to work (when someone who knows what they're doing
is operating it apparently!)

Help appreciated!

John

9 Feb 2005 11:23 PM

Airhead

Show quote Hide quote

"J." <two***@yahoo.com> wrote in message
news:nu2l01tu1tgk7ssa2uidlubk9gl9o67kkr@4ax.com...
> I've installed one of the Linksys Wireless G routers (4 hardwire
> ports, plus B and G mode wireless). I'm trying to access it with a
> handlheld in mode B, that is known to work wirelessly.
>
> The handlheld has been able to scan the network, and thus "sees" it
> but seems unable to connect.
>
> I've turned off WEP for the time being, to simplify things.
>
> Not having configured a wireless router before, Im stumped where
> to go next. The handlheld is a NEC Mobilepro, running windows CE
> 2000, and is known to work (when someone who knows what they're
doing
> is operating it apparently!)
>
> Help appreciated!
>
> John

Make sure the router isnt set for G-mode only...set for mixed or b
Can you access the config page?
Are you getting an IP address?
Is the router set for DHCP server.
Is the device set for dynamic or static IP
Reset the router to factory to make sure all settings are default.

10 Feb 2005 3:27 AM

Pat

Is MAC filtering off?