Home All Groups Group Topic Archive Search About

router or desktop problem?

Author
28 Mar 2005 12:47 AM
Soenda
I have an internet connection problem, and must tell you that I know
very little about this technology. In other words, anyone kind enough
to help me out, please keep it simple.

Setup:
DSL connection.
Router: D-Link DI-713P
Desktop and the laptops all run Windows XP.
The laptops have DWL-650+ wireless cards. There is no problem with
them.
The problem is with the desktop Dell Dimension 4700. It is connected
directly to the router.

The Windows device manager shows under network adapters: Intel Pro
/100 network connection. It tells me that it is working correctly.

This is the problem:
Everything worked fine for months. Then, I noticed there was no
internet connection after I booted the machine. After a while, there
would be an intermittent and very slow connection. Now, there is
nothing.
When I ping 192.168.0.1 I get the message that the host is
unreachable.

When I do an ipconfig /release, there is nothing in the
connection-specific DNS field. The IP address and subnet mask are both
blank.

When I do ipconfig /renew I get the message that an error occurred
while renewing local interface connection: unable to contact your DHCP
server.

Ipconfig /all shows:
node type: unknown
IP routing enabled: no
WINS proxy enabled: no
Connection-specific DNS suffix: blank
Description: Intel Pro /100 VE Network Connection
Physical address: 00-11-11-9E-7B-06
Dhcp enabled: yes
Autoconfiguration enabled: yes
Autoconfiguration IP address: 169.254.70.245
Subnet mask: 255.255.0.0
Default gateway: blank

Questions:
Is there a way I can tell if the problem is with the router or the
integrated network card?
If there is a problem with the router, is there anything I can do
short of replacing it?
If not, can you recommend a DSL router that is compatible with the
DWL-650+ wireless cards?

Let me know if you need any other info.
Thank you anyone who can help me with this.

Author
28 Mar 2005 4:19 AM
BruceM
I assume it is similar to Linksys?
What do you get with 192.168.1.1 ?
To me it looks like it has been reset or something?
The first thing you need to do is to connect either a laptop or the desktop
directly to the router & go through the setup on that first. If you can't
get into the setup page then you must have a problem with either the Cat5
cable or the network card. (or it's driver).


Show quoteHide quote
"Soenda" <hensubnospam@earthlink.net> wrote in message
news:qkke41ldo06pj0vre4iehta6398i9avfh6@4ax.com...
> I have an internet connection problem, and must tell you that I know
> very little about this technology. In other words, anyone kind enough
> to help me out, please keep it simple.
>
> Setup:
> DSL connection.
> Router: D-Link DI-713P
> Desktop and the laptops all run Windows XP.
> The laptops have DWL-650+ wireless cards. There is no problem with
> them.
> The problem is with the desktop Dell Dimension 4700. It is connected
> directly to the router.
>
> The Windows device manager shows under network adapters: Intel Pro
> /100 network connection. It tells me that it is working correctly.
>
> This is the problem:
> Everything worked fine for months. Then, I noticed there was no
> internet connection after I booted the machine. After a while, there
> would be an intermittent and very slow connection. Now, there is
> nothing.
> When I ping 192.168.0.1 I get the message that the host is
> unreachable.
>
> When I do an ipconfig /release, there is nothing in the
> connection-specific DNS field. The IP address and subnet mask are both
> blank.
>
> When I do ipconfig /renew I get the message that an error occurred
> while renewing local interface connection: unable to contact your DHCP
> server.
>
> Ipconfig /all shows:
> node type: unknown
> IP routing enabled: no
> WINS proxy enabled: no
> Connection-specific DNS suffix: blank
> Description: Intel Pro /100 VE Network Connection
> Physical address: 00-11-11-9E-7B-06
> Dhcp enabled: yes
> Autoconfiguration enabled: yes
> Autoconfiguration IP address: 169.254.70.245
> Subnet mask: 255.255.0.0
> Default gateway: blank
>
> Questions:
> Is there a way I can tell if the problem is with the router or the
> integrated network card?
> If there is a problem with the router, is there anything I can do
> short of replacing it?
> If not, can you recommend a DSL router that is compatible with the
> DWL-650+ wireless cards?
>
> Let me know if you need any other info.
> Thank you anyone who can help me with this.
>
Author
28 Mar 2005 4:44 AM
Soenda
192.168.1.1 gets me the same result: unreachable.

I cannot get to the setup page on my desktop.
I can only do it on my laptop that has the wireless card.

Show quoteHide quote
On Mon, 28 Mar 2005 13:49:21 +0930, "BruceM" <bruce@@hotmail.com>
wrote:

>I assume it is similar to Linksys?
>What do you get with 192.168.1.1 ?
>To me it looks like it has been reset or something?
>The first thing you need to do is to connect either a laptop or the desktop
>directly to the router & go through the setup on that first. If you can't
>get into the setup page then you must have a problem with either the Cat5
>cable or the network card. (or it's driver).
>
>
>"Soenda" <hensubnospam@earthlink.net> wrote in message
>news:qkke41ldo06pj0vre4iehta6398i9avfh6@4ax.com...
>> I have an internet connection problem, and must tell you that I know
>> very little about this technology. In other words, anyone kind enough
>> to help me out, please keep it simple.
>>
>> Setup:
>> DSL connection.
>> Router: D-Link DI-713P
>> Desktop and the laptops all run Windows XP.
>> The laptops have DWL-650+ wireless cards. There is no problem with
>> them.
>> The problem is with the desktop Dell Dimension 4700. It is connected
>> directly to the router.
>>
>> The Windows device manager shows under network adapters: Intel Pro
>> /100 network connection. It tells me that it is working correctly.
>>
>> This is the problem:
>> Everything worked fine for months. Then, I noticed there was no
>> internet connection after I booted the machine. After a while, there
>> would be an intermittent and very slow connection. Now, there is
>> nothing.
>> When I ping 192.168.0.1 I get the message that the host is
>> unreachable.
>>
>> When I do an ipconfig /release, there is nothing in the
>> connection-specific DNS field. The IP address and subnet mask are both
>> blank.
>>
>> When I do ipconfig /renew I get the message that an error occurred
>> while renewing local interface connection: unable to contact your DHCP
>> server.
>>
>> Ipconfig /all shows:
>> node type: unknown
>> IP routing enabled: no
>> WINS proxy enabled: no
>> Connection-specific DNS suffix: blank
>> Description: Intel Pro /100 VE Network Connection
>> Physical address: 00-11-11-9E-7B-06
>> Dhcp enabled: yes
>> Autoconfiguration enabled: yes
>> Autoconfiguration IP address: 169.254.70.245
>> Subnet mask: 255.255.0.0
>> Default gateway: blank
>>
>> Questions:
>> Is there a way I can tell if the problem is with the router or the
>> integrated network card?
>> If there is a problem with the router, is there anything I can do
>> short of replacing it?
>> If not, can you recommend a DSL router that is compatible with the
>> DWL-650+ wireless cards?
>>
>> Let me know if you need any other info.
>> Thank you anyone who can help me with this.
>>
>
Author
28 Mar 2005 4:29 AM
DLink Guru
When you double click on your wireless conection in the system tray and goto
the support tab, what is the addres of your default gateway?


Robert...

Show quoteHide quote
"Soenda" <hensubnospam@earthlink.net> wrote in message
news:qkke41ldo06pj0vre4iehta6398i9avfh6@4ax.com...
>I have an internet connection problem, and must tell you that I know
> very little about this technology. In other words, anyone kind enough
> to help me out, please keep it simple.
>
> Setup:
> DSL connection.
> Router: D-Link DI-713P
> Desktop and the laptops all run Windows XP.
> The laptops have DWL-650+ wireless cards. There is no problem with
> them.
> The problem is with the desktop Dell Dimension 4700. It is connected
> directly to the router.
>
> The Windows device manager shows under network adapters: Intel Pro
> /100 network connection. It tells me that it is working correctly.
>
> This is the problem:
> Everything worked fine for months. Then, I noticed there was no
> internet connection after I booted the machine. After a while, there
> would be an intermittent and very slow connection. Now, there is
> nothing.
> When I ping 192.168.0.1 I get the message that the host is
> unreachable.
>
> When I do an ipconfig /release, there is nothing in the
> connection-specific DNS field. The IP address and subnet mask are both
> blank.
>
> When I do ipconfig /renew I get the message that an error occurred
> while renewing local interface connection: unable to contact your DHCP
> server.
>
> Ipconfig /all shows:
> node type: unknown
> IP routing enabled: no
> WINS proxy enabled: no
> Connection-specific DNS suffix: blank
> Description: Intel Pro /100 VE Network Connection
> Physical address: 00-11-11-9E-7B-06
> Dhcp enabled: yes
> Autoconfiguration enabled: yes
> Autoconfiguration IP address: 169.254.70.245
> Subnet mask: 255.255.0.0
> Default gateway: blank
>
> Questions:
> Is there a way I can tell if the problem is with the router or the
> integrated network card?
> If there is a problem with the router, is there anything I can do
> short of replacing it?
> If not, can you recommend a DSL router that is compatible with the
> DWL-650+ wireless cards?
>
> Let me know if you need any other info.
> Thank you anyone who can help me with this.
>
Author
28 Mar 2005 4:41 AM
Soenda
Robert,

It shows 192.168.0.1

On Mon, 28 Mar 2005 04:29:13 GMT, "DLink Guru"
<rjacobs0spamfree@pacbell.net> wrote:

Show quoteHide quote
>When you double click on your wireless conection in the system tray and goto
>the support tab, what is the addres of your default gateway?
>
>
>Robert...
>
>"Soenda" <hensubnospam@earthlink.net> wrote in message
>news:qkke41ldo06pj0vre4iehta6398i9avfh6@4ax.com...
>>I have an internet connection problem, and must tell you that I know
>> very little about this technology. In other words, anyone kind enough
>> to help me out, please keep it simple.
>>
>> Setup:
>> DSL connection.
>> Router: D-Link DI-713P
>> Desktop and the laptops all run Windows XP.
>> The laptops have DWL-650+ wireless cards. There is no problem with
>> them.
>> The problem is with the desktop Dell Dimension 4700. It is connected
>> directly to the router.
>>
>> The Windows device manager shows under network adapters: Intel Pro
>> /100 network connection. It tells me that it is working correctly.
>>
>> This is the problem:
>> Everything worked fine for months. Then, I noticed there was no
>> internet connection after I booted the machine. After a while, there
>> would be an intermittent and very slow connection. Now, there is
>> nothing.
>> When I ping 192.168.0.1 I get the message that the host is
>> unreachable.
>>
>> When I do an ipconfig /release, there is nothing in the
>> connection-specific DNS field. The IP address and subnet mask are both
>> blank.
>>
>> When I do ipconfig /renew I get the message that an error occurred
>> while renewing local interface connection: unable to contact your DHCP
>> server.
>>
>> Ipconfig /all shows:
>> node type: unknown
>> IP routing enabled: no
>> WINS proxy enabled: no
>> Connection-specific DNS suffix: blank
>> Description: Intel Pro /100 VE Network Connection
>> Physical address: 00-11-11-9E-7B-06
>> Dhcp enabled: yes
>> Autoconfiguration enabled: yes
>> Autoconfiguration IP address: 169.254.70.245
>> Subnet mask: 255.255.0.0
>> Default gateway: blank
>>
>> Questions:
>> Is there a way I can tell if the problem is with the router or the
>> integrated network card?
>> If there is a problem with the router, is there anything I can do
>> short of replacing it?
>> If not, can you recommend a DSL router that is compatible with the
>> DWL-650+ wireless cards?
>>
>> Let me know if you need any other info.
>> Thank you anyone who can help me with this.
>>
>
Author
28 Mar 2005 5:22 AM
DLink Guru
Looking over your origional post it shows when you did a ipconfig /all that
you have a ip address of 169.254.70.245 and a subnet of 255.255.0.0... This
is not being given by your router. Manuall change your ip address to
something like 192.168.0.100 with a subnet of 255.255.255.0 and tell me if
that gets your connection back.

Robert....

Show quoteHide quote
"Soenda" <hensubnospam@earthlink.net> wrote in message
news:gl2f41dlckhkjscn0dctd51bo1dq336nbf@4ax.com...
> Robert,
>
> It shows 192.168.0.1
>
> On Mon, 28 Mar 2005 04:29:13 GMT, "DLink Guru"
> <rjacobs0spamfree@pacbell.net> wrote:
>
>>When you double click on your wireless conection in the system tray and
>>goto
>>the support tab, what is the addres of your default gateway?
>>
>>
>>Robert...
>>
>>"Soenda" <hensubnospam@earthlink.net> wrote in message
>>news:qkke41ldo06pj0vre4iehta6398i9avfh6@4ax.com...
>>>I have an internet connection problem, and must tell you that I know
>>> very little about this technology. In other words, anyone kind enough
>>> to help me out, please keep it simple.
>>>
>>> Setup:
>>> DSL connection.
>>> Router: D-Link DI-713P
>>> Desktop and the laptops all run Windows XP.
>>> The laptops have DWL-650+ wireless cards. There is no problem with
>>> them.
>>> The problem is with the desktop Dell Dimension 4700. It is connected
>>> directly to the router.
>>>
>>> The Windows device manager shows under network adapters: Intel Pro
>>> /100 network connection. It tells me that it is working correctly.
>>>
>>> This is the problem:
>>> Everything worked fine for months. Then, I noticed there was no
>>> internet connection after I booted the machine. After a while, there
>>> would be an intermittent and very slow connection. Now, there is
>>> nothing.
>>> When I ping 192.168.0.1 I get the message that the host is
>>> unreachable.
>>>
>>> When I do an ipconfig /release, there is nothing in the
>>> connection-specific DNS field. The IP address and subnet mask are both
>>> blank.
>>>
>>> When I do ipconfig /renew I get the message that an error occurred
>>> while renewing local interface connection: unable to contact your DHCP
>>> server.
>>>
>>> Ipconfig /all shows:
>>> node type: unknown
>>> IP routing enabled: no
>>> WINS proxy enabled: no
>>> Connection-specific DNS suffix: blank
>>> Description: Intel Pro /100 VE Network Connection
>>> Physical address: 00-11-11-9E-7B-06
>>> Dhcp enabled: yes
>>> Autoconfiguration enabled: yes
>>> Autoconfiguration IP address: 169.254.70.245
>>> Subnet mask: 255.255.0.0
>>> Default gateway: blank
>>>
>>> Questions:
>>> Is there a way I can tell if the problem is with the router or the
>>> integrated network card?
>>> If there is a problem with the router, is there anything I can do
>>> short of replacing it?
>>> If not, can you recommend a DSL router that is compatible with the
>>> DWL-650+ wireless cards?
>>>
>>> Let me know if you need any other info.
>>> Thank you anyone who can help me with this.
>>>
>>
>
Author
28 Mar 2005 4:30 PM
Soenda
When I manually typed in IP address: 192.168.0.1, Windows provided the
subnet address 255.255.255.0.
I rebooted and was still unable to make an internet connection.
However, I can ping, and send and receive packets without losing any.
I was not able to do that before. I do not know what that tells me.
though.  For what it is worth,when I do an ipconfig /all I see that
dhcp is not enabled.


Thanks.

On Mon, 28 Mar 2005 05:22:17 GMT, "DLink Guru"
<rjacobs0spamfree@pacbell.net> wrote:

Show quoteHide quote
>Looking over your origional post it shows when you did a ipconfig /all that
>you have a ip address of 169.254.70.245 and a subnet of 255.255.0.0... This
>is not being given by your router. Manuall change your ip address to
>something like 192.168.0.100 with a subnet of 255.255.255.0 and tell me if
>that gets your connection back.
>
>Robert....
>
>"Soenda" <hensubnospam@earthlink.net> wrote in message
>news:gl2f41dlckhkjscn0dctd51bo1dq336nbf@4ax.com...
>> Robert,
>>
>> It shows 192.168.0.1
>>
>> On Mon, 28 Mar 2005 04:29:13 GMT, "DLink Guru"
>> <rjacobs0spamfree@pacbell.net> wrote:
>>
>>>When you double click on your wireless conection in the system tray and
>>>goto
>>>the support tab, what is the addres of your default gateway?
>>>
>>>
>>>Robert...
>>>
>>>"Soenda" <hensubnospam@earthlink.net> wrote in message
>>>news:qkke41ldo06pj0vre4iehta6398i9avfh6@4ax.com...
>>>>I have an internet connection problem, and must tell you that I know
>>>> very little about this technology. In other words, anyone kind enough
>>>> to help me out, please keep it simple.
>>>>
>>>> Setup:
>>>> DSL connection.
>>>> Router: D-Link DI-713P
>>>> Desktop and the laptops all run Windows XP.
>>>> The laptops have DWL-650+ wireless cards. There is no problem with
>>>> them.
>>>> The problem is with the desktop Dell Dimension 4700. It is connected
>>>> directly to the router.
>>>>
>>>> The Windows device manager shows under network adapters: Intel Pro
>>>> /100 network connection. It tells me that it is working correctly.
>>>>
>>>> This is the problem:
>>>> Everything worked fine for months. Then, I noticed there was no
>>>> internet connection after I booted the machine. After a while, there
>>>> would be an intermittent and very slow connection. Now, there is
>>>> nothing.
>>>> When I ping 192.168.0.1 I get the message that the host is
>>>> unreachable.
>>>>
>>>> When I do an ipconfig /release, there is nothing in the
>>>> connection-specific DNS field. The IP address and subnet mask are both
>>>> blank.
>>>>
>>>> When I do ipconfig /renew I get the message that an error occurred
>>>> while renewing local interface connection: unable to contact your DHCP
>>>> server.
>>>>
>>>> Ipconfig /all shows:
>>>> node type: unknown
>>>> IP routing enabled: no
>>>> WINS proxy enabled: no
>>>> Connection-specific DNS suffix: blank
>>>> Description: Intel Pro /100 VE Network Connection
>>>> Physical address: 00-11-11-9E-7B-06
>>>> Dhcp enabled: yes
>>>> Autoconfiguration enabled: yes
>>>> Autoconfiguration IP address: 169.254.70.245
>>>> Subnet mask: 255.255.0.0
>>>> Default gateway: blank
>>>>
>>>> Questions:
>>>> Is there a way I can tell if the problem is with the router or the
>>>> integrated network card?
>>>> If there is a problem with the router, is there anything I can do
>>>> short of replacing it?
>>>> If not, can you recommend a DSL router that is compatible with the
>>>> DWL-650+ wireless cards?
>>>>
>>>> Let me know if you need any other info.
>>>> Thank you anyone who can help me with this.
>>>>
>>>
>>
>
Author
29 Mar 2005 1:10 AM
Yves Konigshofer
There seems to be something wrong with DHCP requests.  Was your computer
initially set to obtaining its IP address (etc.) through DHCP?  In any case,
if you manually provide the IP address (as you have; btw: is it
192.168.0.100 or 192.168.0.1?), then you also have to provide the addresses
of DNS servers.  You can find those on the computers that currently work
when connected to the router.

I would also try the following: Use device manager (start->settings->control
panel->system->hardware->device manager)and locate the ethernet adapter.
Uninstall the ethernet adapter.  Now exit the device manager and reboot.  XP
should redetect the ethernet adapter and reinstall it.  In its default
configuration, it should have DHCP turned on.  Also, make sure that you turn
on windows firewall.

If you can only manually configure your computer's IP address (btw: if the
previous step did not fix the ethernet adapter, there is something wrong
with TCP/IP on that computer), the manual settings you want to use are as
follows:

(1) IP address: Look at the IP addresses of your other computers and add 20
to the last number (e.g., if one is at 192.168.0.103 then use something like
192.168.0.123).  IP addresses are usually handed out sequentially by the
router so it should not dynamically assign this address unless there are a
lot of computers connected.  Alternatively, if you know at what number the
router starts assigning addresses (it could be 192.168.0.100), then you can
choose a number that is just below that range (e.g., 192.168.0.90).  It is
important that the IP address you choose is not currently being used by
another computer on your network.
(2) Subnet: For home networks, this is almost always 255.255.255.0 (this
means that all packets sent to IP addresses that do not share the first
three numbers with those of your computer are sent through the gateway).
(3) Gateway: This is the IP address of your router.  It may be 192.168.0.1,
192.168.1.1, or similar.  Running "ipconfig /all" in a command prompt on one
of the properly functioning computers will reveal it.
(4) DNS servers: Get these by running "ipconfig /all" from one of the
working computers.  Alternatively, connect to your router's configuration
page and look at the DNS entries there.  You usually enter three; although,
one is enough (unless that one is temporarily offline).

Finally, make sure that you are using encryption with your wireless clients
(WPA2/AES > WPA/TKIP > WEP) and change the default password on your router.
If you do not do this, then anyone can connect to your network and also
change settings on your router (or, in some cases, upload new or potentially
bad firmware).

-Yves

Show quoteHide quote
"Soenda" <hensubnospam@earthlink.net> wrote in message
news:v6cg411h9tadt9sh12k1m0f5bl143de0ra@4ax.com...
> When I manually typed in IP address: 192.168.0.1, Windows provided the
> subnet address 255.255.255.0.
> I rebooted and was still unable to make an internet connection.
> However, I can ping, and send and receive packets without losing any.
> I was not able to do that before. I do not know what that tells me.
> though.  For what it is worth,when I do an ipconfig /all I see that
> dhcp is not enabled.
>
>
> Thanks.
>
> On Mon, 28 Mar 2005 05:22:17 GMT, "DLink Guru"
> <rjacobs0spamfree@pacbell.net> wrote:
>
>>Looking over your origional post it shows when you did a ipconfig /all
>>that
>>you have a ip address of 169.254.70.245 and a subnet of 255.255.0.0...
>>This
>>is not being given by your router. Manuall change your ip address to
>>something like 192.168.0.100 with a subnet of 255.255.255.0 and tell me if
>>that gets your connection back.
>>
>>Robert....
>>
>>"Soenda" <hensubnospam@earthlink.net> wrote in message
>>news:gl2f41dlckhkjscn0dctd51bo1dq336nbf@4ax.com...
>>> Robert,
>>>
>>> It shows 192.168.0.1
>>>
>>> On Mon, 28 Mar 2005 04:29:13 GMT, "DLink Guru"
>>> <rjacobs0spamfree@pacbell.net> wrote:
>>>
>>>>When you double click on your wireless conection in the system tray and
>>>>goto
>>>>the support tab, what is the addres of your default gateway?
>>>>
>>>>
>>>>Robert...
>>>>
>>>>"Soenda" <hensubnospam@earthlink.net> wrote in message
>>>>news:qkke41ldo06pj0vre4iehta6398i9avfh6@4ax.com...
>>>>>I have an internet connection problem, and must tell you that I know
>>>>> very little about this technology. In other words, anyone kind enough
>>>>> to help me out, please keep it simple.
>>>>>
>>>>> Setup:
>>>>> DSL connection.
>>>>> Router: D-Link DI-713P
>>>>> Desktop and the laptops all run Windows XP.
>>>>> The laptops have DWL-650+ wireless cards. There is no problem with
>>>>> them.
>>>>> The problem is with the desktop Dell Dimension 4700. It is connected
>>>>> directly to the router.
>>>>>
>>>>> The Windows device manager shows under network adapters: Intel Pro
>>>>> /100 network connection. It tells me that it is working correctly.
>>>>>
>>>>> This is the problem:
>>>>> Everything worked fine for months. Then, I noticed there was no
>>>>> internet connection after I booted the machine. After a while, there
>>>>> would be an intermittent and very slow connection. Now, there is
>>>>> nothing.
>>>>> When I ping 192.168.0.1 I get the message that the host is
>>>>> unreachable.
>>>>>
>>>>> When I do an ipconfig /release, there is nothing in the
>>>>> connection-specific DNS field. The IP address and subnet mask are both
>>>>> blank.
>>>>>
>>>>> When I do ipconfig /renew I get the message that an error occurred
>>>>> while renewing local interface connection: unable to contact your DHCP
>>>>> server.
>>>>>
>>>>> Ipconfig /all shows:
>>>>> node type: unknown
>>>>> IP routing enabled: no
>>>>> WINS proxy enabled: no
>>>>> Connection-specific DNS suffix: blank
>>>>> Description: Intel Pro /100 VE Network Connection
>>>>> Physical address: 00-11-11-9E-7B-06
>>>>> Dhcp enabled: yes
>>>>> Autoconfiguration enabled: yes
>>>>> Autoconfiguration IP address: 169.254.70.245
>>>>> Subnet mask: 255.255.0.0
>>>>> Default gateway: blank
>>>>>
>>>>> Questions:
>>>>> Is there a way I can tell if the problem is with the router or the
>>>>> integrated network card?
>>>>> If there is a problem with the router, is there anything I can do
>>>>> short of replacing it?
>>>>> If not, can you recommend a DSL router that is compatible with the
>>>>> DWL-650+ wireless cards?
>>>>>
>>>>> Let me know if you need any other info.
>>>>> Thank you anyone who can help me with this.
>>>>>
>>>>
>>>
>>
>
Author
29 Mar 2005 2:46 AM
Soenda
Thanks for helping me out.

I uninstalled the Ethernet adapter. Following reboot, it was
reinstalled. I did ipconfig /all and saw that dhcp was enabled.
Autoconfig was enabled as well. However, it gave me as autoconfig IP
address 169.254.70.245. I still was unable to connect.

Next, I manually changed the IP address following your suggestions. I
made sure it was different from the laptops. Also entered the DNS
info. Windows now told me that I was connected. However, when I did
ipconfig /all, it showed that Dhcp was not enabled.  It also showed
that IP routing was not enabled. Do not know if that is helpful.

I am still unable to connect to the internet. The browser tells me
that it cannot find the server.


On Mon, 28 Mar 2005 17:10:19 -0800, "Yves Konigshofer"
<yv***@sStTaAnNfFoOrRdD.edu> wrote:

Show quoteHide quote
>There seems to be something wrong with DHCP requests.  Was your computer
>initially set to obtaining its IP address (etc.) through DHCP?  In any case,
>if you manually provide the IP address (as you have; btw: is it
>192.168.0.100 or 192.168.0.1?), then you also have to provide the addresses
>of DNS servers.  You can find those on the computers that currently work
>when connected to the router.
>
>I would also try the following: Use device manager (start->settings->control
>panel->system->hardware->device manager)and locate the ethernet adapter.
>Uninstall the ethernet adapter.  Now exit the device manager and reboot.  XP
>should redetect the ethernet adapter and reinstall it.  In its default
>configuration, it should have DHCP turned on.  Also, make sure that you turn
>on windows firewall.
>
>If you can only manually configure your computer's IP address (btw: if the
>previous step did not fix the ethernet adapter, there is something wrong
>with TCP/IP on that computer), the manual settings you want to use are as
>follows:
>
>(1) IP address: Look at the IP addresses of your other computers and add 20
>to the last number (e.g., if one is at 192.168.0.103 then use something like
>192.168.0.123).  IP addresses are usually handed out sequentially by the
>router so it should not dynamically assign this address unless there are a
>lot of computers connected.  Alternatively, if you know at what number the
>router starts assigning addresses (it could be 192.168.0.100), then you can
>choose a number that is just below that range (e.g., 192.168.0.90).  It is
>important that the IP address you choose is not currently being used by
>another computer on your network.
>(2) Subnet: For home networks, this is almost always 255.255.255.0 (this
>means that all packets sent to IP addresses that do not share the first
>three numbers with those of your computer are sent through the gateway).
>(3) Gateway: This is the IP address of your router.  It may be 192.168.0.1,
>192.168.1.1, or similar.  Running "ipconfig /all" in a command prompt on one
>of the properly functioning computers will reveal it.
>(4) DNS servers: Get these by running "ipconfig /all" from one of the
>working computers.  Alternatively, connect to your router's configuration
>page and look at the DNS entries there.  You usually enter three; although,
>one is enough (unless that one is temporarily offline).
>
>Finally, make sure that you are using encryption with your wireless clients
>(WPA2/AES > WPA/TKIP > WEP) and change the default password on your router.
>If you do not do this, then anyone can connect to your network and also
>change settings on your router (or, in some cases, upload new or potentially
>bad firmware).
>
>-Yves
>
>"Soenda" <hensubnospam@earthlink.net> wrote in message
>news:v6cg411h9tadt9sh12k1m0f5bl143de0ra@4ax.com...
>> When I manually typed in IP address: 192.168.0.1, Windows provided the
>> subnet address 255.255.255.0.
>> I rebooted and was still unable to make an internet connection.
>> However, I can ping, and send and receive packets without losing any.
>> I was not able to do that before. I do not know what that tells me.
>> though.  For what it is worth,when I do an ipconfig /all I see that
>> dhcp is not enabled.
>>
>>
>> Thanks.
>>
>> On Mon, 28 Mar 2005 05:22:17 GMT, "DLink Guru"
>> <rjacobs0spamfree@pacbell.net> wrote:
>>
>>>Looking over your origional post it shows when you did a ipconfig /all
>>>that
>>>you have a ip address of 169.254.70.245 and a subnet of 255.255.0.0...
>>>This
>>>is not being given by your router. Manuall change your ip address to
>>>something like 192.168.0.100 with a subnet of 255.255.255.0 and tell me if
>>>that gets your connection back.
>>>
>>>Robert....
>>>
>>>"Soenda" <hensubnospam@earthlink.net> wrote in message
>>>news:gl2f41dlckhkjscn0dctd51bo1dq336nbf@4ax.com...
>>>> Robert,
>>>>
>>>> It shows 192.168.0.1
>>>>
>>>> On Mon, 28 Mar 2005 04:29:13 GMT, "DLink Guru"
>>>> <rjacobs0spamfree@pacbell.net> wrote:
>>>>
>>>>>When you double click on your wireless conection in the system tray and
>>>>>goto
>>>>>the support tab, what is the addres of your default gateway?
>>>>>
>>>>>
>>>>>Robert...
>>>>>
>>>>>"Soenda" <hensubnospam@earthlink.net> wrote in message
>>>>>news:qkke41ldo06pj0vre4iehta6398i9avfh6@4ax.com...
>>>>>>I have an internet connection problem, and must tell you that I know
>>>>>> very little about this technology. In other words, anyone kind enough
>>>>>> to help me out, please keep it simple.
>>>>>>
>>>>>> Setup:
>>>>>> DSL connection.
>>>>>> Router: D-Link DI-713P
>>>>>> Desktop and the laptops all run Windows XP.
>>>>>> The laptops have DWL-650+ wireless cards. There is no problem with
>>>>>> them.
>>>>>> The problem is with the desktop Dell Dimension 4700. It is connected
>>>>>> directly to the router.
>>>>>>
>>>>>> The Windows device manager shows under network adapters: Intel Pro
>>>>>> /100 network connection. It tells me that it is working correctly.
>>>>>>
>>>>>> This is the problem:
>>>>>> Everything worked fine for months. Then, I noticed there was no
>>>>>> internet connection after I booted the machine. After a while, there
>>>>>> would be an intermittent and very slow connection. Now, there is
>>>>>> nothing.
>>>>>> When I ping 192.168.0.1 I get the message that the host is
>>>>>> unreachable.
>>>>>>
>>>>>> When I do an ipconfig /release, there is nothing in the
>>>>>> connection-specific DNS field. The IP address and subnet mask are both
>>>>>> blank.
>>>>>>
>>>>>> When I do ipconfig /renew I get the message that an error occurred
>>>>>> while renewing local interface connection: unable to contact your DHCP
>>>>>> server.
>>>>>>
>>>>>> Ipconfig /all shows:
>>>>>> node type: unknown
>>>>>> IP routing enabled: no
>>>>>> WINS proxy enabled: no
>>>>>> Connection-specific DNS suffix: blank
>>>>>> Description: Intel Pro /100 VE Network Connection
>>>>>> Physical address: 00-11-11-9E-7B-06
>>>>>> Dhcp enabled: yes
>>>>>> Autoconfiguration enabled: yes
>>>>>> Autoconfiguration IP address: 169.254.70.245
>>>>>> Subnet mask: 255.255.0.0
>>>>>> Default gateway: blank
>>>>>>
>>>>>> Questions:
>>>>>> Is there a way I can tell if the problem is with the router or the
>>>>>> integrated network card?
>>>>>> If there is a problem with the router, is there anything I can do
>>>>>> short of replacing it?
>>>>>> If not, can you recommend a DSL router that is compatible with the
>>>>>> DWL-650+ wireless cards?
>>>>>>
>>>>>> Let me know if you need any other info.
>>>>>> Thank you anyone who can help me with this.
>>>>>>
>>>>>
>>>>
>>>
>>
>
Author
29 Mar 2005 5:05 AM
Yves Konigshofer
If you manually enter the IP address, then DHCP will be turned off.  IP
routing should be off.

Can you ping the computers on your network?  Have you checked the ethernet
cable for problems?  Try connecting to a site like cnn.com with it's IP
address (http://64.236.24.28).  Is IE configured to use a proxy (you should
not be using a proxy)?

-Yves

Show quoteHide quote
"Soenda" <hensubnospam@earthlink.net> wrote in message
news:j8gh41lk5b5fntvk9iumo52lpev2167rki@4ax.com...
> Thanks for helping me out.
>
> I uninstalled the Ethernet adapter. Following reboot, it was
> reinstalled. I did ipconfig /all and saw that dhcp was enabled.
> Autoconfig was enabled as well. However, it gave me as autoconfig IP
> address 169.254.70.245. I still was unable to connect.
>
> Next, I manually changed the IP address following your suggestions. I
> made sure it was different from the laptops. Also entered the DNS
> info. Windows now told me that I was connected. However, when I did
> ipconfig /all, it showed that Dhcp was not enabled.  It also showed
> that IP routing was not enabled. Do not know if that is helpful.
>
> I am still unable to connect to the internet. The browser tells me
> that it cannot find the server.
>
>
> On Mon, 28 Mar 2005 17:10:19 -0800, "Yves Konigshofer"
> <yv***@sStTaAnNfFoOrRdD.edu> wrote:
>
>>There seems to be something wrong with DHCP requests.  Was your computer
>>initially set to obtaining its IP address (etc.) through DHCP?  In any
>>case,
>>if you manually provide the IP address (as you have; btw: is it
>>192.168.0.100 or 192.168.0.1?), then you also have to provide the
>>addresses
>>of DNS servers.  You can find those on the computers that currently work
>>when connected to the router.
>>
>>I would also try the following: Use device manager
>>(start->settings->control
>>panel->system->hardware->device manager)and locate the ethernet adapter.
>>Uninstall the ethernet adapter.  Now exit the device manager and reboot.
>>XP
>>should redetect the ethernet adapter and reinstall it.  In its default
>>configuration, it should have DHCP turned on.  Also, make sure that you
>>turn
>>on windows firewall.
>>
>>If you can only manually configure your computer's IP address (btw: if the
>>previous step did not fix the ethernet adapter, there is something wrong
>>with TCP/IP on that computer), the manual settings you want to use are as
>>follows:
>>
>>(1) IP address: Look at the IP addresses of your other computers and add
>>20
>>to the last number (e.g., if one is at 192.168.0.103 then use something
>>like
>>192.168.0.123).  IP addresses are usually handed out sequentially by the
>>router so it should not dynamically assign this address unless there are a
>>lot of computers connected.  Alternatively, if you know at what number the
>>router starts assigning addresses (it could be 192.168.0.100), then you
>>can
>>choose a number that is just below that range (e.g., 192.168.0.90).  It is
>>important that the IP address you choose is not currently being used by
>>another computer on your network.
>>(2) Subnet: For home networks, this is almost always 255.255.255.0 (this
>>means that all packets sent to IP addresses that do not share the first
>>three numbers with those of your computer are sent through the gateway).
>>(3) Gateway: This is the IP address of your router.  It may be
>>192.168.0.1,
>>192.168.1.1, or similar.  Running "ipconfig /all" in a command prompt on
>>one
>>of the properly functioning computers will reveal it.
>>(4) DNS servers: Get these by running "ipconfig /all" from one of the
>>working computers.  Alternatively, connect to your router's configuration
>>page and look at the DNS entries there.  You usually enter three;
>>although,
>>one is enough (unless that one is temporarily offline).
>>
>>Finally, make sure that you are using encryption with your wireless
>>clients
>>(WPA2/AES > WPA/TKIP > WEP) and change the default password on your
>>router.
>>If you do not do this, then anyone can connect to your network and also
>>change settings on your router (or, in some cases, upload new or
>>potentially
>>bad firmware).
>>
>>-Yves
>>
>>"Soenda" <hensubnospam@earthlink.net> wrote in message
>>news:v6cg411h9tadt9sh12k1m0f5bl143de0ra@4ax.com...
>>> When I manually typed in IP address: 192.168.0.1, Windows provided the
>>> subnet address 255.255.255.0.
>>> I rebooted and was still unable to make an internet connection.
>>> However, I can ping, and send and receive packets without losing any.
>>> I was not able to do that before. I do not know what that tells me.
>>> though.  For what it is worth,when I do an ipconfig /all I see that
>>> dhcp is not enabled.
>>>
>>>
>>> Thanks.
>>>
>>> On Mon, 28 Mar 2005 05:22:17 GMT, "DLink Guru"
>>> <rjacobs0spamfree@pacbell.net> wrote:
>>>
>>>>Looking over your origional post it shows when you did a ipconfig /all
>>>>that
>>>>you have a ip address of 169.254.70.245 and a subnet of 255.255.0.0...
>>>>This
>>>>is not being given by your router. Manuall change your ip address to
>>>>something like 192.168.0.100 with a subnet of 255.255.255.0 and tell me
>>>>if
>>>>that gets your connection back.
>>>>
>>>>Robert....
>>>>
>>>>"Soenda" <hensubnospam@earthlink.net> wrote in message
>>>>news:gl2f41dlckhkjscn0dctd51bo1dq336nbf@4ax.com...
>>>>> Robert,
>>>>>
>>>>> It shows 192.168.0.1
>>>>>
>>>>> On Mon, 28 Mar 2005 04:29:13 GMT, "DLink Guru"
>>>>> <rjacobs0spamfree@pacbell.net> wrote:
>>>>>
>>>>>>When you double click on your wireless conection in the system tray
>>>>>>and
>>>>>>goto
>>>>>>the support tab, what is the addres of your default gateway?
>>>>>>
>>>>>>
>>>>>>Robert...
>>>>>>
>>>>>>"Soenda" <hensubnospam@earthlink.net> wrote in message
>>>>>>news:qkke41ldo06pj0vre4iehta6398i9avfh6@4ax.com...
>>>>>>>I have an internet connection problem, and must tell you that I know
>>>>>>> very little about this technology. In other words, anyone kind
>>>>>>> enough
>>>>>>> to help me out, please keep it simple.
>>>>>>>
>>>>>>> Setup:
>>>>>>> DSL connection.
>>>>>>> Router: D-Link DI-713P
>>>>>>> Desktop and the laptops all run Windows XP.
>>>>>>> The laptops have DWL-650+ wireless cards. There is no problem with
>>>>>>> them.
>>>>>>> The problem is with the desktop Dell Dimension 4700. It is connected
>>>>>>> directly to the router.
>>>>>>>
>>>>>>> The Windows device manager shows under network adapters: Intel Pro
>>>>>>> /100 network connection. It tells me that it is working correctly.
>>>>>>>
>>>>>>> This is the problem:
>>>>>>> Everything worked fine for months. Then, I noticed there was no
>>>>>>> internet connection after I booted the machine. After a while, there
>>>>>>> would be an intermittent and very slow connection. Now, there is
>>>>>>> nothing.
>>>>>>> When I ping 192.168.0.1 I get the message that the host is
>>>>>>> unreachable.
>>>>>>>
>>>>>>> When I do an ipconfig /release, there is nothing in the
>>>>>>> connection-specific DNS field. The IP address and subnet mask are
>>>>>>> both
>>>>>>> blank.
>>>>>>>
>>>>>>> When I do ipconfig /renew I get the message that an error occurred
>>>>>>> while renewing local interface connection: unable to contact your
>>>>>>> DHCP
>>>>>>> server.
>>>>>>>
>>>>>>> Ipconfig /all shows:
>>>>>>> node type: unknown
>>>>>>> IP routing enabled: no
>>>>>>> WINS proxy enabled: no
>>>>>>> Connection-specific DNS suffix: blank
>>>>>>> Description: Intel Pro /100 VE Network Connection
>>>>>>> Physical address: 00-11-11-9E-7B-06
>>>>>>> Dhcp enabled: yes
>>>>>>> Autoconfiguration enabled: yes
>>>>>>> Autoconfiguration IP address: 169.254.70.245
>>>>>>> Subnet mask: 255.255.0.0
>>>>>>> Default gateway: blank
>>>>>>>
>>>>>>> Questions:
>>>>>>> Is there a way I can tell if the problem is with the router or the
>>>>>>> integrated network card?
>>>>>>> If there is a problem with the router, is there anything I can do
>>>>>>> short of replacing it?
>>>>>>> If not, can you recommend a DSL router that is compatible with the
>>>>>>> DWL-650+ wireless cards?
>>>>>>>
>>>>>>> Let me know if you need any other info.
>>>>>>> Thank you anyone who can help me with this.
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
Author
29 Mar 2005 12:08 PM
Ted
Soenda wrote:
> When I manually typed in IP address: 192.168.0.1, Windows provided the
> subnet address 255.255.255.0.
> I rebooted and was still unable to make an internet connection.
> However, I can ping, and send and receive packets without losing any.
> I was not able to do that before. I do not know what that tells me.
> though.  For what it is worth,when I do an ipconfig /all I see that
> dhcp is not enabled.
>
>
> Thanks.
>
See http://tinyurl.com/56333  download update
If it still fails download WinsockXPFix.exe
http://www.pchell.com/downloads/WinsockXPFix.exe

Ted
Author
28 Mar 2005 6:35 AM
Neill Massello
Soenda <hensubnospam@earthlink.net> wrote:

> The problem is with the desktop Dell Dimension 4700. It is connected
> directly to the router.

Start with the simple and the cheap:
(1) power-cycle the router;
(2) try different Ethernet ports on the router;
(3) replace the Ethernet cable.
Author
28 Mar 2005 7:14 AM
Brian K
Try pinging 192.168.1.1



Show quoteHide quote
"Soenda" <hensubnospam@earthlink.net> wrote in message
news:qkke41ldo06pj0vre4iehta6398i9avfh6@4ax.com...
>I have an internet connection problem, and must tell you that I know
> very little about this technology. In other words, anyone kind enough
> to help me out, please keep it simple.
>
> Setup:
> DSL connection.
> Router: D-Link DI-713P
> Desktop and the laptops all run Windows XP.
> The laptops have DWL-650+ wireless cards. There is no problem with
> them.
> The problem is with the desktop Dell Dimension 4700. It is connected
> directly to the router.
>
> The Windows device manager shows under network adapters: Intel Pro
> /100 network connection. It tells me that it is working correctly.
>
> This is the problem:
> Everything worked fine for months. Then, I noticed there was no
> internet connection after I booted the machine. After a while, there
> would be an intermittent and very slow connection. Now, there is
> nothing.
> When I ping 192.168.0.1 I get the message that the host is
> unreachable.
>
> When I do an ipconfig /release, there is nothing in the
> connection-specific DNS field. The IP address and subnet mask are both
> blank.
>
> When I do ipconfig /renew I get the message that an error occurred
> while renewing local interface connection: unable to contact your DHCP
> server.
>
> Ipconfig /all shows:
> node type: unknown
> IP routing enabled: no
> WINS proxy enabled: no
> Connection-specific DNS suffix: blank
> Description: Intel Pro /100 VE Network Connection
> Physical address: 00-11-11-9E-7B-06
> Dhcp enabled: yes
> Autoconfiguration enabled: yes
> Autoconfiguration IP address: 169.254.70.245
> Subnet mask: 255.255.0.0
> Default gateway: blank
>
> Questions:
> Is there a way I can tell if the problem is with the router or the
> integrated network card?
> If there is a problem with the router, is there anything I can do
> short of replacing it?
> If not, can you recommend a DSL router that is compatible with the
> DWL-650+ wireless cards?
>
> Let me know if you need any other info.
> Thank you anyone who can help me with this.
>
Author
28 Mar 2005 7:43 AM
Bob Smith
your problem is that the internal network card on the DELL is not
getting an IP from the router.  the 169.xxx.xxx.xxx is the microsoft
fallback IP ... this is the best indication that it doesn't have an
ip.


do this, do a disable and enable on the network card on the DELL
(right click on the lan connection, the disable. the enable.)
see if this does it.  If not put an ip into the fixed section fo the
TCP-ip connection within the subnet of the router. Then reboot the
computer and see if you can connect.

If you can , then go back to the DHCP assigned IP an see if it will
assign an ip to the card

IF it won't , then do a 'un-install' of the card from the device
manager, reboot and then let XP find the card and reinstall the
drivers.  If this works you problably had a corrupted TCP=IP stack and
it will be rebuilt by doing the above.


hope this works, I see this all the time with dells,,

Bob Smith
Robert Smith Consulting
Fort Bragg, California

On Mon, 28 Mar 2005 00:47:02 GMT, Soenda <hensubnospam@earthlink.net>
wrote:

Show quoteHide quote
>I have an internet connection problem, and must tell you that I know
>very little about this technology. In other words, anyone kind enough
>to help me out, please keep it simple.
>
>Setup:
>DSL connection.
>Router: D-Link DI-713P
>Desktop and the laptops all run Windows XP.
>The laptops have DWL-650+ wireless cards. There is no problem with
>them.
>The problem is with the desktop Dell Dimension 4700. It is connected
>directly to the router.
>
>The Windows device manager shows under network adapters: Intel Pro
>/100 network connection. It tells me that it is working correctly.
>
>This is the problem:
>Everything worked fine for months. Then, I noticed there was no
>internet connection after I booted the machine. After a while, there
>would be an intermittent and very slow connection. Now, there is
>nothing.
>When I ping 192.168.0.1 I get the message that the host is
>unreachable.
>
>When I do an ipconfig /release, there is nothing in the
>connection-specific DNS field. The IP address and subnet mask are both
>blank.
>
>When I do ipconfig /renew I get the message that an error occurred
>while renewing local interface connection: unable to contact your DHCP
>server.
>
>Ipconfig /all shows:
>node type: unknown
>IP routing enabled: no
>WINS proxy enabled: no
>Connection-specific DNS suffix: blank
>Description: Intel Pro /100 VE Network Connection
>Physical address: 00-11-11-9E-7B-06
>Dhcp enabled: yes
>Autoconfiguration enabled: yes
>Autoconfiguration IP address: 169.254.70.245
>Subnet mask: 255.255.0.0
>Default gateway: blank
>
>Questions:
>Is there a way I can tell if the problem is with the router or the
>integrated network card?
>If there is a problem with the router, is there anything I can do
>short of replacing it?
>If not, can you recommend a DSL router that is compatible with the
>DWL-650+ wireless cards?
>
>Let me know if you need any other info.
>Thank you anyone who can help me with this.
Author
28 Mar 2005 4:27 PM
Soenda
I may have made a little bit of progress.
I did disable/enable. That did not do anything. Windows told me it was
"acquiring a network address, Firewalled." A while later I go the
message: Limited or no connectivity, Firewalled.

Next, I did a repair. Windows told me it was renewing the IP address.
Then I got the message that it was unable to do so.

I followed your suggestion and manually typed in IP address:
192.168.0.1. It provided the subnet address 255.255.255.0.
I rebooted and was still unable to get anywhere in my browser.

However, now when I ping, I can send and receive packets without
losing any. I guess that is progress.
When I do an ipconfig /all I see that dhcp is not enabled. That
probably makes sense to you. It does not to me, because I do not
really understand what I am doing.

I am not sure how you would like me to proceed from here. I know you
mentioned going back to the DHCP assigned IP. I am not sure I
understand this. I do know how to do an uninstall of the card from the
device manager.

Thanks for your help.

On Sun, 27 Mar 2005 23:43:39 -0800, Bob Smith <n***@na6t.com> wrote:

Show quoteHide quote
>your problem is that the internal network card on the DELL is not
>getting an IP from the router.  the 169.xxx.xxx.xxx is the microsoft
>fallback IP ... this is the best indication that it doesn't have an
>ip.
>
>
>do this, do a disable and enable on the network card on the DELL
>(right click on the lan connection, the disable. the enable.)
>see if this does it.  If not put an ip into the fixed section fo the
>TCP-ip connection within the subnet of the router. Then reboot the
>computer and see if you can connect.
>
>If you can , then go back to the DHCP assigned IP an see if it will
>assign an ip to the card
>
>IF it won't , then do a 'un-install' of the card from the device
>manager, reboot and then let XP find the card and reinstall the
>drivers.  If this works you problably had a corrupted TCP=IP stack and
>it will be rebuilt by doing the above.
>
>
>hope this works, I see this all the time with dells,,
>
>Bob Smith
>Robert Smith Consulting
>Fort Bragg, California
>
>On Mon, 28 Mar 2005 00:47:02 GMT, Soenda <hensubnospam@earthlink.net>
>wrote:
>
>>I have an internet connection problem, and must tell you that I know
>>very little about this technology. In other words, anyone kind enough
>>to help me out, please keep it simple.
>>
>>Setup:
>>DSL connection.
>>Router: D-Link DI-713P
>>Desktop and the laptops all run Windows XP.
>>The laptops have DWL-650+ wireless cards. There is no problem with
>>them.
>>The problem is with the desktop Dell Dimension 4700. It is connected
>>directly to the router.
>>
>>The Windows device manager shows under network adapters: Intel Pro
>>/100 network connection. It tells me that it is working correctly.
>>
>>This is the problem:
>>Everything worked fine for months. Then, I noticed there was no
>>internet connection after I booted the machine. After a while, there
>>would be an intermittent and very slow connection. Now, there is
>>nothing.
>>When I ping 192.168.0.1 I get the message that the host is
>>unreachable.
>>
>>When I do an ipconfig /release, there is nothing in the
>>connection-specific DNS field. The IP address and subnet mask are both
>>blank.
>>
>>When I do ipconfig /renew I get the message that an error occurred
>>while renewing local interface connection: unable to contact your DHCP
>>server.
>>
>>Ipconfig /all shows:
>>node type: unknown
>>IP routing enabled: no
>>WINS proxy enabled: no
>>Connection-specific DNS suffix: blank
>>Description: Intel Pro /100 VE Network Connection
>>Physical address: 00-11-11-9E-7B-06
>>Dhcp enabled: yes
>>Autoconfiguration enabled: yes
>>Autoconfiguration IP address: 169.254.70.245
>>Subnet mask: 255.255.0.0
>>Default gateway: blank
>>
>>Questions:
>>Is there a way I can tell if the problem is with the router or the
>>integrated network card?
>>If there is a problem with the router, is there anything I can do
>>short of replacing it?
>>If not, can you recommend a DSL router that is compatible with the
>>DWL-650+ wireless cards?
>>
>>Let me know if you need any other info.
>>Thank you anyone who can help me with this.
Author
29 Mar 2005 7:51 AM
Bob Smith
I still think that the TCP/ip stack is corrupt,

try this, this is straight from DELLs website on how to rebuild
the winsock layer

It won't hurt anything, just rebuilds the winsock.  (ie turns loose
the 169.xxx.xxx.xxx ip and lets everything work properly.)


+++++++++++++++++++++++++++++++++++

To rebuild the winsock layer in Windows XP, perform the following
steps:

Click the Start button, and then click Run.
The Run window appears.
Type cmd in the Run window, and then press the <Enter> key or click
OK.
The command DOS box appears.
At the prompt, type :

netsh winsock reset,

and then press the <Enter> key.

The message Successfully reset the Winsock Catalog appears.
Close the command window and reboot the system.
The internet connectivity will function normally again.

++++++++++++++++++++++++++++++++++++++++++++++++++

I've seen this problem since SP1 , you get the 169 ip or "little or no
connectivity" or weird do connection problems when you do a
repair, or disable/enable.  Usually by doing a disable/enable or
uninstalling the NIC and letting winXp re-install it the problem is
cured, but i've also used the above info the cure the problem.



let me know if this works,

Bob

Robert Smith Consulting









On Sun, 27 Mar 2005 23:43:39 -0800, Bob Smith <n***@na6t.com> wrote:

Show quoteHide quote
>your problem is that the internal network card on the DELL is not
>getting an IP from the router.  the 169.xxx.xxx.xxx is the microsoft
>fallback IP ... this is the best indication that it doesn't have an
>ip.
>
>
>do this, do a disable and enable on the network card on the DELL
>(right click on the lan connection, the disable. the enable.)
>see if this does it.  If not put an ip into the fixed section fo the
>TCP-ip connection within the subnet of the router. Then reboot the
>computer and see if you can connect.
>
>If you can , then go back to the DHCP assigned IP an see if it will
>assign an ip to the card
>
>IF it won't , then do a 'un-install' of the card from the device
>manager, reboot and then let XP find the card and reinstall the
>drivers.  If this works you problably had a corrupted TCP=IP stack and
>it will be rebuilt by doing the above.
>
>
>hope this works, I see this all the time with dells,,
>
>Bob Smith
>Robert Smith Consulting
>Fort Bragg, California
>
>On Mon, 28 Mar 2005 00:47:02 GMT, Soenda <hensubnospam@earthlink.net>
>wrote:
>
>>I have an internet connection problem, and must tell you that I know
>>very little about this technology. In other words, anyone kind enough
>>to help me out, please keep it simple.
>>
>>Setup:
>>DSL connection.
>>Router: D-Link DI-713P
>>Desktop and the laptops all run Windows XP.
>>The laptops have DWL-650+ wireless cards. There is no problem with
>>them.
>>The problem is with the desktop Dell Dimension 4700. It is connected
>>directly to the router.
>>
>>The Windows device manager shows under network adapters: Intel Pro
>>/100 network connection. It tells me that it is working correctly.
>>
>>This is the problem:
>>Everything worked fine for months. Then, I noticed there was no
>>internet connection after I booted the machine. After a while, there
>>would be an intermittent and very slow connection. Now, there is
>>nothing.
>>When I ping 192.168.0.1 I get the message that the host is
>>unreachable.
>>
>>When I do an ipconfig /release, there is nothing in the
>>connection-specific DNS field. The IP address and subnet mask are both
>>blank.
>>
>>When I do ipconfig /renew I get the message that an error occurred
>>while renewing local interface connection: unable to contact your DHCP
>>server.
>>
>>Ipconfig /all shows:
>>node type: unknown
>>IP routing enabled: no
>>WINS proxy enabled: no
>>Connection-specific DNS suffix: blank
>>Description: Intel Pro /100 VE Network Connection
>>Physical address: 00-11-11-9E-7B-06
>>Dhcp enabled: yes
>>Autoconfiguration enabled: yes
>>Autoconfiguration IP address: 169.254.70.245
>>Subnet mask: 255.255.0.0
>>Default gateway: blank
>>
>>Questions:
>>Is there a way I can tell if the problem is with the router or the
>>integrated network card?
>>If there is a problem with the router, is there anything I can do
>>short of replacing it?
>>If not, can you recommend a DSL router that is compatible with the
>>DWL-650+ wireless cards?
>>
>>Let me know if you need any other info.
>>Thank you anyone who can help me with this.
Author
29 Mar 2005 4:59 PM
Jeff Liebermann
On Mon, 28 Mar 2005 23:51:03 -0800, Bob Smith <n***@na6t.com> wrote:

>I still think that the TCP/ip stack is corrupt,
(...)
>netsh winsock reset,

Argh.  That removes all 3rd party LSP (Layered Service Provider)
chains and resets everything to the original MS defaults.  Most of the
spyware removal tools and some browser plugs will need to be
reinstalled after that.  There are also complications per MS.
  http://support.microsoft.com/kb/892350
Too big a hammer, methinks.

Instead, download and run one of these:
  http://www.snapfiles.com/get/winsockxpfix.html
  http://www.cexx.org/lspfix.htm
It removes an gaps and corrupted entries, doesn't totally hose the LSP
chains, and leaves the plugins intact.

You may wanna also look arount the LSP chain list before attacking:
  http://www.lavasoftusa.com/software/addons/lspexplorer.shtml


--
Jeff Liebermann    je***@comix.santa-cruz.ca.us
150 Felker St #D   http://www.LearnByDestroying.com
Santa Cruz CA 95060    AE6KS  831-336-2558