>>>Anybody know the pass word for Netgear ME 102 Access Point Management
>>>Utility?
>>>
>>>thanks
>>>Jesper
>>>
>>>
>>>
>>>
>>>     
>>>
>>I'm using an ME102, but it has been several years since I set it up. I
>>believe that it came with a blank password by default. I'd try a hard
>>reset of the device.
>>   
>>
>
>how do I perform a hard reset?
>
>/Jesper
>
>
> 
>

> >>>Anybody know the pass word for Netgear ME 102 Access Point Management
> >>>Utility?
> >>>
> >>>thanks
> >>>Jesper

> >>I'm using an ME102, but it has been several years since I set it up. I
> >>believe that it came with a blank password by default. I'd try a hard
> >>reset of the device.
> >how do I perform a hard reset?
> >/Jesper

> Again, I'm not really sure. Generally, devices are reset to factory
> default by holding in the reset button for approximately 15 seconds
> while applying power to the unit. That is, unplug the unit, press in the
> reset button, apply power an hold in the reset button for approximately
> 15 seconds.
>
> I don't really know if that will work for this particular unit.

>>>>>Anybody know the pass word for Netgear ME 102 Access Point Management
>>>>>Utility?
>>>>>
>>>>>thanks
>>>>>Jesper
>>>>>         
>>>>>
>
> 
>
>>>>I'm using an ME102, but it has been several years since I set it up. I
>>>>believe that it came with a blank password by default. I'd try a hard
>>>>reset of the device.
>>>>       
>>>>
>>>how do I perform a hard reset?
>>>/Jesper
>>>     
>>>
>
> 
>
>>Again, I'm not really sure. Generally, devices are reset to factory
>>default by holding in the reset button for approximately 15 seconds
>>while applying power to the unit. That is, unplug the unit, press in the
>>reset button, apply power an hold in the reset button for approximately
>>15 seconds.
>>
>>I don't really know if that will work for this particular unit.
>>   
>>
>
>The problem is that I can't find a reset button on my device??!! So?
>
>/Jesper
>
>
> 
>

> Jesper Olsen wrote:
>
>>>>>> Anybody know the pass word for Netgear ME 102 Access Point
>>>>>> Management
>>>>>> Utility?
>>>>>>
>>>>>> thanks
>>>>>> Jesper
>>>>>>        
>>>>>
>>
>> 
>>
>>>>> I'm using an ME102, but it has been several years since I set it
>>>>> up. I
>>>>> believe that it came with a blank password by default. I'd try a hard
>>>>> reset of the device.
>>>>>      
>>>>
>>>> how do I perform a hard reset?
>>>> /Jesper
>>>>    
>>>
>>
>> 
>>
>>> Again, I'm not really sure. Generally, devices are reset to factory
>>> default by holding in the reset button for approximately 15 seconds
>>> while applying power to the unit. That is, unplug the unit, press in
>>> the
>>> reset button, apply power an hold in the reset button for approximately
>>> 15 seconds.
>>>
>>> I don't really know if that will work for this particular unit.
>>>  
>>
>>
>> The problem is that I can't find a reset button on my device??!! So?
>>
>> /Jesper
>>
>>
>> 
>>
> Mine is mounted high in my stairwell and is not easy to access, but I
> can't see a reset button on it.
>
> So -- chunk the unit?

On Thu, 24 Mar 2005 09:23:20 +0100, "Jesper Olsen" <jespe***@olsen.dk>
wrote:

>
> Are you accessing the unit with the SNMP manager or the USB manager?
>>
>> I know the SNMP manager requires the password but I'm not sure the USB
>> manager does. It might be the solution.
>>
>> (I'd try that, but it would be way too much trouble to dismount my unit
>> and access it with a USB connection).
>
>I'm trying to access it with the SNMP mangager and here I need the pass
>word. I haven't tried with the the USB manager, but eventually I will.