|
pc
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
Wireless Networkingalt.internet.wireless
Harvey Gratt -
2 Apr 2005 6:33 PM - 5 messages
I have an R40 Dual Boot system - win xp pro sp2 and win98se. I am connected wirelessy to a Belkin 54g router router. When I check my speeds in win98se, they are as they should be. However, when I check them in win xp (latest wireless drivers), they are reduced ...
Doug Fox -
2 Apr 2005 5:29 PM - 2 messages
I am searching for a way that a systems administrator can locate/detect/identify unauthorized wireless access points in global (or WAN) network, including those across the oceans, even not being physically there! One way is "war driving". However, it requires a person physically walking ...
Jim Gaughran -
2 Apr 2005 12:09 PM - 6 messages
I'm getting ready to install ADSL and want to have a wireless hookup to my wife's notebook. I would prefer to hardwire my desktop, but would be open to suggestions. My question regards the type of equipment I need to buy. I know I need a PC ...
tommynospam -
2 Apr 2005 7:02 AM - 3 messages
When the G810 can't find a DHCP server, what default address does it use? I changed the IP from static to dynamic but when it couldn't find a DHCP server, I lost contact with the unit. Had to reset the unit and ...
Cowboy -
2 Apr 2005 2:39 AM - 2 messages
I want a sub-laptop for wardriving/walking/riding. A regular laptop is
just too large. The old HP Jornadas (?) were just about perfect,
size-wise. But they don't make them anymore I guess. Any
recommendations?
Must run Linux (Knoppix-STD, etc) and Windows 2000.
--
Cowboy
brought to you by [link] ...
hunty1 -
2 Apr 2005 1:38 AM - 2 messages
Could some direct me to a site that would show me how to put on lmr400 ends Thanks ...
Ritter197 -
1 Apr 2005 10:59 PM - 9 messages
I want to copy and paste a random generated WEP/WPA file from the clipboard to my settings on the desktop and the laptop. But even though I see the generated file on the clipboard, I can not save it ...
Alan -
1 Apr 2005 9:00 PM - 4 messages
I have a SMC wireless router which is hard wired (cat 5 cable to rj45 jack) to one computer, and a wireless connection to another. Its config to be Infrastructure mode. The 1st computer that is connected with cable has multiple boot ...
Ian Pellew -
1 Apr 2005 3:22 PM - 2 messages
Hi all; Anyone know if there is kit for connecting usb to usb via wireless I want to connect to a usb modem from a couple of houses away? No TCPIP involved. Regards Ian ...
Mark Williamson -
1 Apr 2005 2:32 PM - 7 messages
Hi all, have just installed new firmware version 1.50.14 on my LINKSYS BEFW11S4 but cannot now get it setup from the setup CD. Any ideas? cannot find earlier versions of firmware either to go back. ...
William P. N. Smith -
1 Apr 2005 2:21 PM - 11 messages
Does anyone make a reliable AP with PoE? I'm about to buy three or four APs for a client's house, and tucking them into the ceilings would work best, so I'm looking for something with a ...
tzar -
1 Apr 2005 2:08 AM - 3 messages
Im looking to buy a wireless router Right now I have 2 choices the Linksys WRT54G or Microsoft MN 700 What is better? I just got rid of my DLink 624 becuase it used to drop the connection all ...
sf -
31 Mar 2005 8:12 PM - 6 messages
I'm a member of a group that will soon be placing several free wireless hotspots in urban areas. These spots will all be in outdoor public regions, mainly in parks or shopping/downtown areas. We're on the hunt ...
Beowulf -
31 Mar 2005 7:26 PM - 5 messages
I installed a wireless PCI card (b) on my second WindowsXP PC system. It shows it is connected to my main computer (using Linksys wireless router) wireless router signal, and shows bytes sent but 0 bytes received. Wireless router has encryption turned off. What am I doing or not doing wrong? Very ...
Tim C -
31 Mar 2005 5:45 PM - 3 messages
I've not been a long-time follower of this group, so forgive me if the topic's come up before; I've hunted Google/Deja but not found anything. Anyway, some time ago a coworker gave me an 802.11b card. I have a ...
Werner Hussen -
31 Mar 2005 5:41 PM - 2 messages
Hi, we have an ASUS WL 500 g WLAN-Router in our home for internet. But the signal isn't good in all for the computers so I want to install a second wlan-Router (ACER Broadband router) in the rooms. What must I ...
PAUL HANSON -
31 Mar 2005 5:23 PM - 2 messages
Hi there, Does anyone know of a Wireless Hot Spot at London Euston Train Station or near by? Thanks ...
Ian Pellew -
31 Mar 2005 1:47 PM - 3 messages
Hi all; Is there a wireless USB set up made by anyone? I mean:- usb - wireless ...... wireless - usb No tcpip I want to get usb across a couple of houses from one XP to another XP? ...
Yellman -
31 Mar 2005 10:40 AM - 5 messages
Hi all, I would appreciate any help anyone can give me on the following problem/scenario. Basically what I want to do is surf the Internet wirelessly in my home in the UK - only got a 56K connection. The ...
jon.roland -
31 Mar 2005 5:48 AM - 2 messages
To CellularConcepts.com I look forward to receiving a message that explains how to set up my new Motorola E680 running Linux with T-Mobile service to 1. Browse the Web (it came set up for use in hong Kong, doesn't connect ...
timewizard -
31 Mar 2005 12:49 AM - 3 messages
Has anyone used this product .. Is it any good... ...
Erling -
30 Mar 2005 11:36 PM - 5 messages
Hello. I hope somebody can help me with this subject. My pc is connected to the internet by an usb-modem, which has wireless connection to my internetprovider. This pc with the internetconnection shares it with 2 other pc's ...
SteveP -
30 Mar 2005 8:55 PM - 5 messages
Are there any USB wireless adapters that will operate in Promiscuous mode ? I have a Zydas chipped USB wireless adapter and that only appears to recive traffic for its MAC address and broadcasts. Using Ntop and Windows 2000. ...
Barry OGrady -
30 Mar 2005 1:17 PM - 2 messages
I am using a Centrino based notebook with built in 802.11b wireless. It works very well with my Realtek 802.11b access point, but when I tried it at a friends place with his 802.11g access point I got some ...
Tomek W. -
30 Mar 2005 1:09 PM - 7 messages
Some one have a copy or know where I can find it ? ...
nusr -
30 Mar 2005 12:55 PM - 7 messages
I have a WLAN using the Linksys WAP54G access point implemented with the WPA-AES security mode. The group renewal key is set for 3600 seconds. I have the following wireless adaptors attached to the access point. Linksys WPC54G ...
Gareth Leatham -
30 Mar 2005 8:13 AM - 9 messages
When switch off my computer for the night, the next morning when i switch on, the connection between my laptop and my computer is gone. The icons are in the system tray, I am sending packets but not receiving. The only ...
youthminman -
29 Mar 2005 7:03 PM - 2 messages
I have just installed a netgear wg602 v2 access point. I have it in my office. The network settings for my office include dns server addresses. The access point is fired up and ready. I can access it to change ...
tallgreen -
29 Mar 2005 4:07 PM - 3 messages
What's the difference? I have a di-624 router, I am able to connect the 2100ap via ClientAP or ptpBridge to the root AP (the di-624). Why would anyone choose one over the other? This does not seem to be made ...
manojk12 -
29 Mar 2005 8:40 AM - 2 messages
I have recently purchansed Buffalo Air Statio G54 ( WYR G54) router. When I switch on, it remains to Diag mode & does not switch to normal mode. It's Diag LED remains on & other All LEDs also remain on & ...
Cowboy -
29 Mar 2005 3:45 AM - 5 messages
I've played with Netstumbler and airsnort on Windows and Kismet on
Linux. I see lots of room for improvement in these apps in terms of
usability and functionality. I've been looking for a .NET "pet
project" for some time now.
Netstumbler is a great app but I wish it was open source and did more
(like packet sniffing).
I'm wondering how to find the information required to create a
Netstumbler/Kismet type application. The NDIS stuff on Windows might
get me part way there but probably doesn't support monitor mode in
which case I'd have to go right to the chipset correct?. I'm really
only interested in supporting Orinoco Classic Gold cards right now so I
guess I could get the source code for the Linux drivers and dissect
them.
Here's my off-the-cuff high-level development plan:
- experiment with NDISUIO
- develop first pass at base-bones GUI
- experiment with monitor mode stuff
- polish GUI and functionality
App functionality would include:
- AP discovery (active and passive scanning)
- GPS integration/mapping
- packet sniffing/capture/decoding
- ? (WEP cracking?, other ideas anyone?)
Thoughts/suggestions?
--
Cowboy
brought to you by [link] ...
jchasm -
29 Mar 2005 3:29 AM - 3 messages
I have a normal (non-wireless) linksys router, connected to several pc's. I'd like to be able to use my laptop wirelessly, but I don't want to put in wireless cards to all the existing computers. I was told there is something I can plug into ...
bench -
29 Mar 2005 1:28 AM - 2 messages
Hi,
I'm using a DWL-G710 dlink repeater with DWL-7200AP dlink access
point. Network diagram is: laptop -> repeater -> access point ->
router -> internet
Our router requires the MAC addresses of multiplelaptops connecting to
the repeater for access monitoring but for some reason the router sees
the MAC address of the repeater. Is this a problem with the repeater?
Thanks,
Bench
--
bench
brought to you by [link] ...
Ross Moody -
29 Mar 2005 12:25 AM - 6 messages
I have a new dsl Linksys wireless setup and are getting only low connects. Are the Antenna boosters any good? My system is a WRT54GS at my base desktop connected wireless to a desktop with a WUSB54GS less than 50 feet ...
Shampoo Store -
28 Mar 2005 11:16 PM - 12 messages
Has anybody used Navini for WIFI? We are looking for a WIFI or WIMAX products that can do point to multipoint 10mi. Any suggestions? Thanks in advance. Tracy ...
Michael Ruebner -
28 Mar 2005 10:40 PM - 3 messages
Greetings, According to Google, this has been asked gazillion times before. But somehow I can't seem to wrap my mind around the concept, so please bear with me. Two scenarios: 1. Have laptop users access LAN resources through a wireless access point. ...
David Allen -
28 Mar 2005 9:15 PM - 10 messages
I have been asked to install a network to allow the sharing of a BB connection. There would be two computers, one in the main house and one in a garage loft (office convertion) just under 100m away from the other. I'm ...
Paul -
28 Mar 2005 7:20 PM - 3 messages
Just curious what the practical limit of number of users per access point is? I ask because we use the Proxim AP-2500 and in real world situation strange things start to happen at about 80 simultaneous wireless laptop users. ...
Couttsy -
28 Mar 2005 10:02 AM - 5 messages
Hi, I am in urgent need of getting a 56k wireless modem for use with a PC laptop but cant find one anywhere. Could someone please point me in the direction of one, or a manufacturer who still makes them. ...
Pat Patterson -
28 Mar 2005 2:26 AM - 5 messages
I have done hard reset and cannot access the web setup screens. It will act as a switch and wired you can access the internet through it to my di 624. Net stumbler shows it with a good signal on ch 6 and ...
Soenda -
28 Mar 2005 12:47 AM - 17 messages
I have an internet connection problem, and must tell you that I know very little about this technology. In other words, anyone kind enough to help me out, please keep it simple. Setup: DSL connection. Router: D-Link DI-713P ...
EW -
27 Mar 2005 10:14 PM - 12 messages
Does anyone here use the new Clearwire WiMax Internet service -- the fast, inexpensive, simple internet service available in a few cities? I understand that they block Ports 25, Port 80, file sharing ports, and perhaps streaming video and audio! WTF? If so, what's the point of their ...
Mike Benz -
27 Mar 2005 4:48 PM - 4 messages
I have a simple question, I have 2 Belkin wireless Routers. One is the router on the cable modem and the other is setup as an access point only at the other end of the house. The one setup as an access point only is plugged ...
David Lawson -
27 Mar 2005 4:03 PM - 4 messages
Just a couple of months ago had a wireless network added to our house. This computer has the modem and router etc. I fear this computer is dying a slow death. (Numerous strange noises etc) Any suggestions since I had the ...
Maggie -
27 Mar 2005 3:38 PM - 2 messages
I have a brand new Toshiba Satellite with an internal Atheros super G card. I was using a Linksys G speed router and a card in a 2 year old Toshiba with no problems (it is still working, btw) No matter how I ...
Stephan Baune -
27 Mar 2005 12:34 PM - 3 messages
Cheers guys, now seriously, I almost got mad, but let me explain the scenario before I do so: I've got a laptop (XP, SP2) with a PCMCIA wireless card, namely the Netgear WG511 from Netgear which is supposed to connect to an AP ...
wifi rookie -
27 Mar 2005 8:58 AM - 2 messages
Hello,
I would like to use Lingo's unlimited long distance broadband calling
but I want to use it over WIFI. Using a cell phone or IP phone. Can
anyone Help? Im sure this can be done somehow, it just sounds like it
can work. I'd like to have a 10 mile range from my base. I hope someone
can help.
thanks
--
wifi rookie
brought to you by [link] ...
jon.roland -
27 Mar 2005 8:16 AM - 2 messages
I just staarted using a Motorola V600 cellphone that can function as a modem for my laptop connected via the USB port, but I also looked at the Audiovox PC 5220 wireless card. Is anyone aware of any upcoming product that would combine the functions of these two devices? In other ...
Bob Horton -
27 Mar 2005 1:21 AM - 6 messages
Thought I'd pass along to the group my initial experience with a Belkin pre-n system. I have the pre-n router, a desktop card (which is really a PCI card with an adapter built into it for a wireless PC card to fit into), ...
Christian -
27 Mar 2005 12:28 AM - 2 messages
I know that AES encryption is more secure than TKIP encryption. My question is which is faster AES or TKIP? ...
|
|||||||||||||||||||||||