|
pc
newsgroups
|
|||||||||||||||||||||||
|
|||||||||||||||||||||||
Netgear ME102 Wireless AP
installed and got it working for a few minutes, then got told by the device that it needed a new firmware which the supplier kindly supplied when I bought it. Problem it however I ran the firmware upgrade process using the suggested method but it died about 25% of the way through. And now I cant see anything at all. If I try and upgrade the firmware now it just gets 5% of the way thorough and comes up saying DFU Failed and thats it it just closes. Anyone know how to resolve this issue at all? "WebWalker" <webwal***@eudoramail.com> wrote in message See below resultsnews:m24d21ltb20ias93isfc7pqfmoac0bcpv5@4ax.com... > Check the manual, you need to know how to configurate the router/AP. > > -- > WebWalker No luck C:\Documents and Settings\chris>ping 192.168.100.1 Pinging 192.168.100.1 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.100.1: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss) C:\Documents and Settings\chris>ping 192.168.0.5 Pinging 192.168.0.5 with 32 bytes of data: Reply from 192.168.0.5: bytes=32 time<10ms TTL=64 Reply from 192.168.0.5: bytes=32 time<10ms TTL=64 Reply from 192.168.0.5: bytes=32 time<10ms TTL=64 Reply from 192.168.0.5: bytes=32 time<10ms TTL=64 Ping statistics for 192.168.0.5: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), However I cant get anything via a website or telnet on 192.168.0.5 Any more ideas? Show quoteHide quote "CK" <pu***@pxfernyz.pbz> wrote in message AP is connected to a hub that is then connected to my PC.news:vUhVd.275140$K7.87142@fe2.news.blueyonder.co.uk... > I will try that later tonight when I get home and let you know how I get on > > -- > Kind Regards > > > "WebWalker" <webwal***@eudoramail.com> wrote in message > news:heua21lo6hl8f5m55cn02seemk8es6m65o@4ax.com... > > On Wed, 2 Mar 2005 09:51:11 -0000, "Chris Kilian" <ajd***@adf.com> > > wrote: > > > >>AP is connected to a hub that is then connected to my PC. > >>As for config I dont have a clue as I cant access it at all. I can however > >>ping it on 192.168.0.5 but cant telnet or get to it via http either > > > > Then you don't need to install the USB driver. > > Open your Internet browser any key in "http://192.168.100.1" to the > > address bar to configurate the router. > > > > -- > > WebWalker > > As for config I dont have a clue as I cant access it at all. I can however ping it on 192.168.0.5 but cant telnet or get to it via http either Show quoteHide quote "RBM" <rmottola1(remove th***@optonline.net> wrote in message Anyone got one of these at all. Bought one butmy wireless card cant see itnews:a74Vd.27111$531.9785@fe08.lga... > What do you have the AP connected to and how is it configured > "CK" <pu***@pxfernyz.pbz> wrote in message > news:l70Vd.172085$68.75709@fe1.news.blueyonder.co.uk... > > Anyone got one of these at all. Bought one butmy wireless card cant see it > > at all. Netgear reckon you need to install the USB drivers then configure > > it but they dont work. > > > > Any ideas > > > > > > > > > > at all. Netgear reckon you need to install the USB drivers then configure it but they dont work. Any ideas "Chris Kilian" <ajd***@adf.com> wrote in message news:<4228b0e5$0$8741$db0fefd9@news.zen.co.uk>... How were you doing the upgrade over the WLAN or by using the USB> Ok got a new development on this matter, I have managed to get the drivers > installed and got it working for a few minutes, then got told by the device > that it needed a new firmware which the supplier kindly supplied when I > bought it. Problem it however I ran the firmware upgrade process using the > suggested method but it died about 25% of the way through. And now I cant > see anything at all. If I try and upgrade the firmware now it just gets 5% > of the way thorough and comes up saying DFU Failed and thats it it just > closes. > > Anyone know how to resolve this issue at all? connection ??? Assuming that the USB connection was being used(One of my ME102 didn't survive the upgrade :((( ), then you might want to start preparing yourself for trying to get the Handler/Netgear to swap the device for a new device !!! Regards Andrew Show quoteHide quote > > -- > Kind Regards > > www.networkingbasics.co.uk > www.ckconsultants.co.uk > "WebWalker" <webwal***@eudoramail.com> wrote in message > news:m24d21ltb20ias93isfc7pqfmoac0bcpv5@4ax.com... > > Check the manual, you need to know how to configurate the router/AP. > > > > -- > > WebWalker > No luck > See below results > C:\Documents and Settings\chris>ping 192.168.100.1 > > Pinging 192.168.100.1 with 32 bytes of data: > > Request timed out. > Request timed out. > Request timed out. > Request timed out. > > Ping statistics for 192.168.100.1: > Packets: Sent = 4, Received = 0, Lost = 4 (100% loss) > C:\Documents and Settings\chris>ping 192.168.0.5 > > Pinging 192.168.0.5 with 32 bytes of data: > > Reply from 192.168.0.5: bytes=32 time<10ms TTL=64 > Reply from 192.168.0.5: bytes=32 time<10ms TTL=64 > Reply from 192.168.0.5: bytes=32 time<10ms TTL=64 > Reply from 192.168.0.5: bytes=32 time<10ms TTL=64 > > Ping statistics for 192.168.0.5: > Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), > > However I cant get anything via a website or telnet on 192.168.0.5 > > Any more ideas? > > > "CK" <pu***@pxfernyz.pbz> wrote in message > news:vUhVd.275140$K7.87142@fe2.news.blueyonder.co.uk... > > I will try that later tonight when I get home and let you know how I get > on > > > > -- > > Kind Regards > > > > > > "WebWalker" <webwal***@eudoramail.com> wrote in message > > news:heua21lo6hl8f5m55cn02seemk8es6m65o@4ax.com... > > > On Wed, 2 Mar 2005 09:51:11 -0000, "Chris Kilian" <ajd***@adf.com> > > > wrote: > > > > > >>AP is connected to a hub that is then connected to my PC. > > >>As for config I dont have a clue as I cant access it at all. I can > however > > >>ping it on 192.168.0.5 but cant telnet or get to it via http either > > > > > > Then you don't need to install the USB driver. > > > Open your Internet browser any key in "http://192.168.100.1" to the > > > address bar to configurate the router. > > > > > > -- > > > WebWalker > > > > > > AP is connected to a hub that is then connected to my PC. > As for config I dont have a clue as I cant access it at all. I can however > ping it on 192.168.0.5 but cant telnet or get to it via http either > > > "RBM" <rmottola1(remove th***@optonline.net> wrote in message > news:a74Vd.27111$531.9785@fe08.lga... > > What do you have the AP connected to and how is it configured > > "CK" <pu***@pxfernyz.pbz> wrote in message > > news:l70Vd.172085$68.75709@fe1.news.blueyonder.co.uk... > > > Anyone got one of these at all. Bought one butmy wireless card cant see > it > > > at all. Netgear reckon you need to install the USB drivers then > configure > > > it but they dont work. > > > > > > Any ideas > > > > > > > > > > > > > > > > > > Anyone got one of these at all. Bought one butmy wireless card cant see it > at all. Netgear reckon you need to install the USB drivers then configure it > but they dont work. > > Any ideas 
Other interesting topics
|
|||||||||||||||||||||||
